CURRENT RATING FOR THE # 443540
- 1.5A - CONTINUOUS DUTY
- 2A - 15 minute run time
- 2.5A -10 minute run time
Start-Up Torque data: .0585 Newton-meter (.043 pound- feet or .518 pound-inches)
Scroll to bottom of page to view performance curves.
- Magnets: Two high-energy saturated C8 ceramic magnets.
- Shaft: Steel 8mm (5/16") diameter, 38mm length, with 1mm full-length flat.
- Armature: 12-slot armature 42mm diameter wound with AWG30 magnet wire (fusing current:10 amps).
- Brushes: Replacement stock no. 443731 - $ 30.25 per set
- Bearings: Two double-sealed 26mm OD ball bearings
- Rotation: The red or white output wire is positive for clockwise rotation from the shaft end. Can use Full Wave Bridge to rotate in either direction if required.
- Speed: Zero to 5,000 rpm (84 Hertz)- generates at all speeds
- OUTPUT DEPENDS ON LOAD APPLIED
- Mounting: Four M4 holes on the front or rear end caps, or by hose clamps on the magnet drum.
- Weight: 1.5Kg (3.3lb) Shipping weight 1.9Kg (4lb), dimensions 150x150x300mm (6x6x12in).
- Resistance: Internal resistance 21 ohms. Inductance 40mH.
- Performance: See performance curves below
- Generators are not weather proof and must be enclosed if outside.
- More about Startup Torque
- *Generators are non- returnable once installed and connected to a power supply.
- If you receive a generator that is damaged in shipping, please notify us before you install the generator in your application.
Click on image below for Performance Curves